Buying Projector Lamps – Tips To Save You Time And Money

Whether you are buying OEM projector lamps or compatible replacement projector lamps, you really deserve a lamp that will serve your needs and offer you the value for the money that you spent on it. Original projector lamps are highly recommended, but they can be expensive, so people end up considering compatible lamps to serve their projector needs. As long as you buy the right projector lamp, you will definitely save you money and time.

Tips when buying

Tip 1 – Be cautious with companies that offer projector lamps without housing. Plastic housing for the bulbs is always a safety and performance measure and it reduces the damage risks. Reliable manufacturers never sell lamps as bulbs only without plastic housing so always go for those lamps that have proper housing.

Tip 2 – When buying a compatible projector lamp, ensure beforehand that it will indeed fit into your projector. It is also important to make sure that the compatible lamp comes with a good warranty. Be wary of manufactures that seem to be over promising especially when selling you’re the compatible projector lamps because they may not live up to the promises.

Tip 3 – When getting original projector lamps, ensure that your product is properly marked or labeled with manufacturer details. The original lamps have clear and right manufacturer logos on them, whereas counterfeit products may lack these important indicators and will usually come in plain brown and white boxes. Original lamps will actually come with stamped codes on them to identify the company; a lack of the code on your lamp could be an indication that it is not original.

Tips when using

The lamp life of projector lamps that are good quality can be anywhere around 1,500 to 2,000 hours. The market now has newer model that can go up to 5,000 hours. However, the life of your lamp also largely relies on how you handle it during use. Proper care can save you costs of replacement and time for the same as well.

Tip 1 – Be cautious when using your projector so it does not overheat. Lamp failure often results from excessive temperature stress.

Tip 2 – After powering the lamp down, always allow it to cool for ten minutes minimum. This is important because the lamp remains susceptible to damages in the hot state. You should also therefore ensure that you do not move the projector during this time or when the lamp is on.

Tip 3 – To disperse excess heat properly, ensure that there is enough space around the projector exhaust or fan.

Tip 4 – Try as much as possible to use the projector in an environment that is dust-free and clean so that you minimize air filters and fans clogging rates. It is also a very good idea to have the filters cleaned on a regular basis.

Tip 5 – Never leave the projector in environments that are too cold or too hot. These conditions can be damaging costing you in the process.